This kit contains everything needed to prepare your car for running RaceSafe H2O at an event. To purchase the kit, simply select from each of the options above and then add the kit to your cart. All parts are required to complete purchase. Instructions for installation are provided on the competitors page. RaceSafe H2o unit shown for illustration purposes only.
Details of kit parts:
12v Wiring Loom: The wiring loom is the main power source for the RaceSafe H2o unit, the wiring loom must be connected to a permanent power 12v source so the RaceSafe H2o unit can function properly. The wiring loom comes in 3m & 5m lengths but can be shortened to the correct length.
3-in-1 Permanent Antenna with Wiring Loom: The 3-in-1 Permanent Antenna has 3 main aerial components that the RaceSafe H2o unit uses. 3-in-1 Permanent Antenna has a 12mm bolt at the base of the antenna which bolts through a hole on the flat surface of which you choose to fix the antenna to, this allows the antenna leads to run through the bolt and into the RaceSafe H2o unit. This greatly reduces the potential damage to antenna leads, while offering a cleaner look both on the exterior and interior of the boat.
Please Note: This antenna requires a 12mm hole to be drilled in the surface the aerial is mounted to.
RaceSafe H2o Mount: This kit comes with a Flat Bolt On Mount that can be bolted to most flat surfaces. Both mounts have a 25mm rubber coated ball to fit the appropriate 25mm Mount Connector.
RaceSafe H2o Mount Connector: This connects to mount to the RallySafe unit. This is done using the ball on the mount and the ball on the back of the RallySafe unit. Available in 50mm & 75mm lengths.
If you have any questions, please consult our competitors page, or contact us.