RallySafe Installation Kit – Motorbikes and Quadbikes

$175.00$182.50

You must select from all the options below before you add the Kit to your cart.

12 Volt Wiring Loom

Clear

3-in-1 Antenna for Motorbikes and Open Top Cars Only

Clear

RallySafe Mount

Clear

RallySafe Mount Connector

Clear

Product Description

PLEASE NOTE: This kit is NOT intended for normal Rally purposes. This kit is only for those competitors with motorbikes, quadbikes, or off-road vehicles.

Alternate mounts can be purchased from Rally Raid Engineering.

This kit contains everything needed to prepare your car for running RallySafe at an event. To purchase the kit, simply select from each of the options above and then add the kit to your cart. All parts are required. Instructions for installation are provided on the competitors page. RallySafe unit shown for illustration purposes only.
Details of kit parts:

12v Wiring Loom: The wiring loom is the main power source for the Rally Safe unit, the wiring loom must be connected to a permanent power 12v source so the Rally Safe unit can function properly. The wiring loom comes in 3m & 5m lengths but can be shortened to the correct length.

3-in-1 Permanent Antenna with Wiring Loom: The 3-in-1 Permanent Antenna has 3 main aerial components that the RallySafe unit uses. 3-in-1 Permanent Antenna has a 12mm bolt at the base of the antenna which bolts through a hole on the flat surface of which you choose to fix the antenna to, this allows the antenna leads to run through the bolt and into the RallySafe unit. This greatly reduces the potential damage to antenna leads, while offering a cleaner look both on the exterior and interior of the Motorbike or Quad Bike.
Please Note: This antenna requires a 12mm hole to be drilled in the surface the aerial is mounted to.

Additional information

12 Volt Wiring Loom

Length

3m, 5m

3-in-1 Antenna for Motorbikes and Open Top Cars Only

Wiring Loom Length

.5m, 1m, 1.5m, 2m, 2.5m, 3m

Type

Stick On, Bolt On

RallySafe Mount

Type

Roll Cage Mount, Flat Mount Base, M8 Bolt Mount

RallySafe Mount Connector

Length

50mm, 75mm